Executive Summary - Specification and Supply Position
TL;DR - The Mistairhome WL-QH05B (PLUS) holds 510 mL and mists 61 mL per hour or 28.4 mL per hour, which is 8.4 hours and 18.0 hours per fill; it covers 16 sq m (173 sq ft) at a 2.6 m ceiling and measures 23.7 dB on the high step and 20.7 dB on the sleep step; it draws 3.1 W and runs from USB-C 5V/2A, runs while charging; 4200 mAh lithium polymer, giving 10.1 hours per charge on the low mist step; it weighs 544 g and measures 11.8 x 11.8 x 20.2 cm, and ships documented to CE / RoHS / FCC standards for import into Denmark. MOQ is 200 units per SKU with a 25-35-day lead time, FOB Shenzhen or EXW Longgang.
China Wanlin supplies the Near Silent Bedside Humidifier category as a direct manufacturer, not as a trading intermediary. The unit described below is one configuration out of 24 combinations (8 chassis x 3 SKU builds) that share a common misting family, a common tank and seal line and a common documentation set, so a distributor can build a coherent shelf from one source rather than stitching together unrelated suppliers. Every unit referenced on this page corresponds to a specific bill of materials held on file, so the figures below can be reproduced or independently verified at sample stage.
Full specification of WL-QH05B-PLUS:
| Misting method | Ultrasonic piezo disc at 1.7 MHz with a low-turbulence outlet grille |
| Tank capacity | 510 mL |
| Mist output on the high step | 61 mL per hour |
| Mist output on the low step | 28.4 mL per hour |
| Run time per fill on the high step | 8.4 hours |
| Run time per fill on the low step | 18.0 hours |
| Coverage area | 16 sq m (173 sq ft) at a 2.6 m ceiling |
| Noise at 1 m on the high step | 23.7 dB |
| Noise at 1 m on the sleep step | 20.7 dB |
| Water type | Tap or distilled; the tank lifts off as a single piece |
| Mineral dust handling | Cartridge optional, drops into the filler neck |
| Fill method | Top fill, sealed cap for carrying |
| Battery pack | 4200 mAh lithium polymer |
| Cordless run time | Up to 10.1 hours per charge on the low mist step |
| Charge time | 3.5 hours from empty |
| Power input | USB-C 5V/2A, runs while charging |
| Rated power on the high step | 3.1 W |
| Control interface | Top touch pad, three mist steps, timer at two, four and eight hours, memory function |
| Night light | Warm dot plus a downward glow, both switchable off |
| Protection | Dry-run shut-off, tilt switch, cell over-temperature and overcharge cut-out |
| Dimensions | 11.8 x 11.8 x 20.2 cm |
| Weight | 544 g |
| Warranty | 18 months |
Shipping configuration: Plus build, + hard carry case + wick and cartridge starter set + gift box + funnel. Master carton holds 24 units. Stated lead time is 25-35 days from order confirmation and deposit. Misting discs, wicks and cartridges are repeat line items and are ordered separately from the appliance.
Why Buyers Are Sourcing This Category Now
Three things move this category in Denmark: heated or cooled air that dries a room faster than people expect, buildings sealed tightly enough that nothing replaces the moisture, and a cleaning task that decides whether the product is still in use by March. Channel structure follows a stable pattern: importers take container volumes, regional distributors break bulk into pharmacy, hospitality and facilities supply, and online sellers absorb the mixed-SKU remainder that suits catalogue breadth.
For the Near Silent Bedside Humidifier segment the deciding specifications are the noise figure at the step people sleep on, the run time per fill, and what the unit does with dissolved minerals. Peak mist volume ranks below all three, which surprises first-time buyers. This is why the table above states figures by model rather than by marketing tier: a buyer comparing two SKUs needs the noise on the sleep step, the run time per fill and the water handling side by side, because those three predict both satisfaction and return rates better than any other set.
Wanlin serves Denmark through three programmes that suit different balance sheets. New partners start with sample evaluation then a mixed trial order. Established distributors move to scheduled container shipments with locked pricing windows. Brand owners run private-label programmes with their own artwork and manuals. In all three cases the factory documentation, including the certificates and battery files listed further down this page, references the specific model code on the order rather than a generic family certificate, which is the most common cause of customs delay in this category. The WL-QH05B (PLUS) packs 24 units to a carton, carries a 18 months warranty and a 25-35 days stated lead time, and draws 3.1 W on the high step.
Engineering Notes - Noise, Mist Output and Water Quality
Three numbers decide whether this category works in a room, and only one of them appears on most specification sheets. The first is millilitres per hour, quoted for both steps so a buyer can divide it into the tank capacity and know how long a fill lasts before ordering a single unit. The second is hours per fill, which is the number that decides whether a unit needs filling every night or every second night - and therefore whether it survives its first season in a household.
The third is the coverage figure, and it is the one most often quoted dishonestly. We state the ceiling height behind it, because a floor area alone means nothing: a room with 3.4 m ceilings holds proportionally more air and will run a unit dry faster than the floor plan suggests, and a mechanically ventilated room loses moisture continuously regardless of its size. Any buyer can check this in twenty minutes with a hygrometer, and we would rather they did.
Every production batch is sampled for four things before release: mist output against the declared figure by weighed run, the decibel reading at one metre on both steps, pack capacity against the cell specification by discharge test where a cell is fitted, and dry-run shut-off function on an empty tank. The WL-QH05B (PLUS) packs 24 units to a carton, carries a 18 months warranty and a 25-35 days stated lead time, and draws 3.1 W on the high step.
Featured Deployment and Field Case Records
Three deployment records from the Near Silent Bedside Humidifier programme, each with the conditions that shaped it. Site detail is kept because it is the part that transfers: the water, the ceiling, the rota and the complaint are what decide whether a unit stays in service, and none of them appear on a specification sheet.
Case Study 1: Mombasa, Kenya
Deployment: A resort with 60 rooms and an on-site spa
Timing: Fourteen months from August 2025
The spa was the driver rather than the rooms: treatment rooms hold a target humidity for client comfort and for the products used, and the spa manager could state the target she needed. The humidistat chassis held it, and the rooms followed in a second order once the resort saw the unit running reliably for a season.
Case Study 2: Turin, Italy
Deployment: A hotel group operating four properties in the Piedmont region
Timing: One winter from November 2025
Turin sits under an inversion layer for much of the winter, so the city's air is already dry and the heated rooms are drier. The group took a mixed first order across two chassis, tested for a month in one property and rolled out to the other three in January. What converted them was not the humidity reading but the absence of the morning complaint at reception.
Case Study 3: Debrecen, Hungary
Deployment: A university hospital with a paediatric ward of 22 rooms
Timing: One year from March 2025
The ward needed a night light for nursing checks but nothing that would keep a child awake, which is a contradiction most products resolve badly. The amber ring below 4 lux, dimmable to fully dark, was the detail that got the order, and the ward's night staff set it to off for the majority of rooms and on for the two observation rooms.
The pattern across all three is that the deciding factor was never peak output. It was whether the tank lasted a full shift, whether the unit could be cleaned inside the time a round allows, and whether anyone complained about the noise or the dust. Those are the questions we ask before quoting. The WL-QH05B (PLUS) packs 24 units to a carton, carries a 18 months warranty and a 25-35 days stated lead time, and draws 3.1 W on the high step.
Application Scenarios Across Bedrooms, Offices and Wards
Four placement patterns cover most of the enquiries we see for this category. The useful observation is that each one is answered by configuration and placement rather than by buying a larger unit, which is the default reflex and usually the wrong one.
| Scenario | Room or site | What the site needs | What the unit does |
| SC06-CLEANING | Sites where one person cleans twenty rooms on a timed round | Anything that has to be carried to a sink inverted, or scrubbed through a narrow neck, adds minutes to every room turned that day. | Top fill from a jug and a tank opening a hand can reach into, which is why housekeeping accepts this chassis and rejects narrow-neck designs on sight. |
| SC09-TANKRUN | Rooms with nobody responsible for refilling, and buildings on a weekly maintenance round | Refilling decides whether an appliance survives in a managed building more than performance does. | A large tank holding a night plus a working day on the low step, with a humidistat so the unit runs only when the room actually needs it. |
| SC02-BEDSIDE | A nightstand beside an adult bed in a heated room | A unit that has to be refilled at two in the morning stops being used inside a week. | A tank sized for a night plus part of the following day on the low step, with a level window that can be read from standing height before the light goes out. |
| SC05-HARDWATER | Markets on hard municipal water where every ultrasonic plume leaves mineral dust | White dust on dark furniture is the complaint that generates the return, not the dryness. | A demineralisation cartridge in the tank neck, or an evaporative build that sidesteps the problem entirely by leaving the minerals in the wick. |
Two of these four are decided before the unit is switched on: whether the tank lasts the interval the site can actually service, and whether the cleaning task fits the round. For this configuration that means 28.4 mL per hour at 20.7 dB, holding 18.0 hours per fill across a 16 sq m (173 sq ft) room.
What a Factory-Direct Programme Changes for the Buyer
Buying direct changes three things that no catalogue can show. The first is the bill of materials. A trading company quotes a price; a factory can tell you which disc, which cell and which seal is inside the unit, and what each of them costs to replace. That matters in this category more than most, because the wearing parts are the parts that decide whether the product is still in service in March.
The second is what happens when something goes wrong at the destination. A defect that traces to a single component is a component we stock, and it rides in the next container at the cost of the part rather than at the cost of a replacement unit. A distributor who cannot supply a consumable loses the next appliance order along with the goodwill.
The third is the ability to say no. We will decline an ultrasonic build for a hard-water market without the cartridge, because that configuration produces a return rate rather than a reorder, and a factory that can change the build is the only kind of supplier that can give that answer honestly. The WL-QH05B (PLUS) packs 24 units to a carton, carries a 18 months warranty and a 25-35 days stated lead time, and draws 3.1 W on the high step.
Certification, Water Quality and Market Access
Market access for this product is mostly a documentation exercise, and the mapping is stable. Europe wants the CE technical file, an EMC report and IEC 60335-1. North America adds FCC documentation for the digitally controlled models. Japan and Korea issue against PSE and KC, Australia and New Zealand against RCM, and all four want the certificates to name the model being shipped.
The second thing worth knowing is what a certificate does not cover. It does not cover the water path, and a clinical or childcare buyer will ask about that before it asks about EMC. We hold a material declaration for every wetted part - tank, seal, disc and outlet - and it is the document that most often decides a hospital order.
The third is the battery overlay. Where a cell is fitted, UN38.3 and IEC 62133 sit on top of everything else and add a step at freight booking. For a buyer shipping to several markets at once, the cheapest route is to declare the full destination list at quotation stage so the documentation is raised once, in one package, rather than market by market as each order lands. For this configuration that means 28.4 mL per hour at 20.7 dB, holding 18.0 hours per fill across a 16 sq m (173 sq ft) room.
Unit Economics, Consumables and Order Sizing
Order sizing in this category is a volume question before it is a quantity question, because the units differ in size by more than an order of magnitude across the range. A master carton of this model holds 24 units at 0.086 cubic metres, which puts roughly 5,928 units in a 20 ft container and 13,032 units in a 40 ft container on a pure volume basis.
That figure is the starting point, not the answer. Palletisation, loading losses and the mix of SKUs in the container all pull it down, and a mixed container across three SKUs will not hit the single-SKU number. We run the mix with the buyer before quoting freight, because the difference between a planned and an unplanned container is usually one extra shipment a season.
The second sizing decision is the spares ratio, which most first-time buyers set too low. One spare disc per twenty units and one cartridge per unit on hard water is the ratio that prevents the awkward second shipment, and the parts are cheap enough that over-ordering them costs less than the freight of a top-up. The WL-QH05B (PLUS) packs 24 units to a carton, carries a 18 months warranty and a 25-35 days stated lead time, and draws 3.1 W on the high step.
Buyer Questions Answered
What is the minimum order quantity for a first quiet humidifier order?
MOQ is 200 units per SKU for standard builds and 300 units for custom colour or private-label packaging. Mixed-container orders combining several models are accepted as long as each individual SKU clears its own minimum. The specification table on this page shows the exact build we ship for WL-QH05B-PLUS.
How is the noise figure measured, and what does it mean in a bedroom?
We measure at one metre in a semi-anechoic corner and quote the step, so the two published figures for WL-QH05B are 23.7 dB on the high step and 20.7 dB on the sleep step. The sleep-step figure is the one to compare, because it is the step a bedroom unit is left on all night. A buyer can repeat the measurement in a quiet room with a phone application and will get within a decibel or two.
Does this humidifier leave white mineral dust on furniture?
It depends on the water and on the misting method, and it is the single largest cause of returns in this category. An ultrasonic disc throws everything dissolved in the water into the air, so on a hard supply it leaves a fine white mineral film on dark surfaces within days. Two answers exist: a demineralisation cartridge in the tank, which is a consumable with a real working life, or an evaporative build where the minerals stay in the wick. This unit is specified as cartridge optional, drops into the filler neck.
Which compliance files ship with a quiet humidifier order?
The standard file set is the CE technical file, RoHS and REACH declarations, an EMC test report, the IEC 60335-1 household appliance safety report, and for battery builds a UN38.3 test report with an IEC 62133 cell report and MSDS. For North America we add FCC documentation for the digitally controlled models. Certificates are issued against WL-QH05B, the model code on the order, rather than against a generic family.
Can we sell these under our own brand, with our own packaging?
Yes. Private label covers housing colour, logo placement, retail artwork, manual language and the accessory kit, and most of it sits inside existing tooling for this range, so customisation does not mean re-engineering. The decision we ask buyers to make early is which consumables travel with the appliance, because a unit sold without a cartridge into a hard-water market generates complaints that no artwork will fix.
How often does the unit need cleaning, and what does that involve?
Every five to seven days in continuous use, with a full dry-out if the unit will stand unused. That interval is why we specify a wide tank opening on this chassis: a tank a hand cannot reach into is a tank that never gets cleaned properly. Biofilm in standing water is the underlying reason, and it is not a defect, it is what water at room temperature does.
What warranty and spares support do you provide?
18 months against manufacturing defect on WL-QH05B. Misting discs, wicks, cartridges, seals and cells are stocked as separate line items and can ride in the same container as the units, which is the cheapest way to buy them. We suggest one spare disc per twenty units and one cartridge per unit where the water is hard.
How long does sampling and first production take?
Samples ship in 5 to 7 working days from an existing specification, or 15 to 20 days if a custom colour is required. First production runs in 25-35 days depending on SKU and quantity, measured from order confirmation and deposit, with the exact figure stated on the proforma invoice rather than left open. Battery shipments add a documentation step at booking.
Who This Programme Suits
This is a programme for buyers who intend to reorder. The first order is rarely the profitable one for either side; what makes it worthwhile is a range that can be relisted next season without a new test round, a spares line that keeps customers, and a consumable that brings them back.
It suits distributors building an air-treatment shelf, brand owners who want a chassis they can put their own artwork on, pharmacy and home-care groups planning a consumable line, hospitality groups standardising across several properties, and cross-border sellers who need prep done before the container moves.
It suits less well anyone whose only criterion is the lowest unit price, because the price difference between a well-built unit and the cheapest one on the market is smaller than the cost of the returns it prevents. The WL-QH05B (PLUS) packs 24 units to a carton, carries a 18 months warranty and a 25-35 days stated lead time, and draws 3.1 W on the high step.
How a First Order Is Structured
A first order runs in five steps and none of them need to be slow. The first is the specification: which chassis, which SKU build, and which markets, because the market list decides the documentation. The second is sampling, 5 to 7 working days from an existing specification or 15 to 20 if a custom colour is required.
The third is the paperwork - certificates, manuals, artwork and the battery files where a cell is fitted - and it runs in parallel with the second rather than after it, which is where most of the time is either saved or lost. The fourth is production, measured from order confirmation and deposit. The fifth is booking, which is where a battery build needs its extra few days.
What we ask a buyer to decide before step one is which consumables travel with the appliances, because that choice affects the packing list and the freight, and changing it later costs a second shipment. The WL-QH05B (PLUS) packs 24 units to a carton, carries a 18 months warranty and a 25-35 days stated lead time, and draws 3.1 W on the high step.
Next Step for Import Buyers
If there is one thing to take from this page, it is that the quiet claim and the dust claim are the two that decide the return rate, and both can be checked before an order is placed. Measure the noise on the step people sleep on, and put the unit on the water it will actually be sold with.
Everything else - output, coverage, run time, documentation - is measurable and published here so it can be verified rather than taken on trust. Where the answer depends on the room we say so rather than quoting a number that only holds in a laboratory.
Wanlin supplies this range as a manufacturer and is open to partnership with distributors, brand owners, pharmacy and home-care groups, hospitality and facilities buyers, cross-border sellers and export traders. Samples, specification sheets and certificates are available on request. On the WL-QH05B (PLUS) the figures worth carrying into the next order are the 510 mL tank, the 18.0 hours per fill on the low step, and the 20.7 dB reading on the sleep step.
Published by: Wanlin Manufacturing Group, MistAirHome Export Division
Published on: September 28, 2026
Data sources: in-house factory testing + misting disc and cell specifications + certification and battery files + partner deployment records
Company address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
References: factory quality manual + third-party test reports + customer shipment records
Contact: Mistairhome@163.com / +8613261677119 / https://www.mistairhome.com
